| The DUAL LFO module houses two individual low frequency oscillators
(LFOs) used mainly for modulation purposes. Each LFO section offers
three selectable waveforms, CV-input with attenuator and a rate ranging
from 10 seconds to approximately 100 Hz. By applying positive or
negative voltage, this range can be widened with a factor up to 30,
resulting in extreme slow or fast modulation rates.
Both LFOs offer individual inputs to reset the waveform, making it
possible to synchronize to a sequencer with appropriate rate settings
and separate reset-impulses.
LFO 1 offers triangle, saw tooth down and square waveforms, LFO 2
offers triangle, saw tooth up and sample & Hold. Output voltages
are +/- 5 volts at maximum.
When not patched, the two CV-inputs are internally cross-wired, meaning
that LFO 1 controls the speed of LFO 2 and vice versa with both
attenuators being active to set modulation intensity.
> tech specs
* two voltage-controlled LFOs
* interactive modulations
* rate from 10 s to 100 Hz
* saw tooth, square, triangle and sample & hold waveforms
* separate reset-inputs
* the module has a width of 40 mm (8 TE).