| Module A-186 is a very simple, passive unit that combines up to 7 gate,
trigger or analog signals by or-wiring.
- If all seven inputs are low or open the output is low
- if one or more of the seven inputs is "high" the output turns high
- combination ("or"-wiring) of gate and/or trigger signals (e.g. from
LFOs, sequencers, keyboards, Midi-to-CV interfaces, ribbon controller,
theremin, trigger delays or any other source of gate/trigger signals.
- Maximum extractor for analog voltages: at the output the maximum
voltage (minus ~ 0.7V because of the diodes) appears, similar function
as the maximum output of the A-172 Maximum/Minimum Selector module,
e.g. for simple waveshaping.
Here, three LFO are connected in A186 module, the out will deliver the yellow signal :
> tech specs
Width: 4 HP / 20.0 mm
Depth: 20 mm (measured from the rear side of the front panel)
Current: 0 mA (passive module without power supply).